For 2200, 6600, 7700 and 9800 Series Rim and Surface Vertical Rods.

Operated by lever from outside and when push pad is depressed, except outside has to enter a pre-programmed code on the keypad in order to retract the latch upon turning the lever. For use with 2200, 6600, 7700 and 9800 Series Rim and Surface Vertical Rods.

GENERAL: Full length 5 1/2" lever handle with 7/8" return. Escutcheon dimension
3 1/2" x 8 1/8". Key removable outside lever for all models for fast re-keying. 2 1/8" diameter bore.

BREAKAWAY LEVER DESIGN: Lever will stay at the 5 o'clock position when forced down without retracting the latch, to prevent breaking of handle and giving the impression of the handle being broken to discourage or scare off vandals.

DOOR RANGES: 1 3/4" - 2"

ANSI STANDARDS: Meets or exceeds ANSI A 156.2, Series 4000 Grade 2 requirements.

STRIKES: ASA 1 1/4" x 4 7/8" standard

CYLINDER & KEYWAYS: 6 pin solid brass "C" keyway standard.

TRIM: Thru-bolted assembly through door with separate spring cage for each lever.

Easy Installation covers 161 PREP (2 1/8" HOLE)

EASY ON-DOOR CODE CHANGE: Code can be changed without removing the lock from the door and using only a "code change" key.

1-12 DIGIT CODE: An entry code can be a combination of 1 to 12 digits long. The digits can be entered in any order. For example, if the chosen 6-digit code is "5283XZ" it can be entered as "ZX3825" or "3X8Z25" or in any other combination of the 6-digit code.

CODE-FREE OPTION (PASSAGE MODE): Once enabled, the lock remains unlocked until disable PASSAGE MODE is initiated.

WEATHER RESISTANT: Can resist above or below normal weather conditions without compromising security.

NON-HANDED: Easily field reversible handing.